Wiedergabe von Film und Video zu schnell (springt)

Begonnen von tyco, 27. Juni 2003, 16:59:58 Uhr

⏪ vorheriges - nächstes ⏩

0 Mitglieder und 1 Gast betrachten dieses Thema.

tyco

27. Juni 2003, 16:59:58 Uhr Letzte Bearbeitung: 27. Juni 2003, 18:35:03 Uhr von tyco
Habe das Problem das die Wiedergabe von Film- und Videosequenzen zu schnell ist.

Dabei ist es egal ob die Wiedergabe über PowerDVD, Divx oder über den Pinnacle Videorecorder erfolgt.

Sogar Spielsequenzen z.B. bei Enter the Matrix werden zu schnell wiedergegeben.

Die Wiedergabegeschwindigkeit beträgt schätzungsweise das doppelte der normalen Geschwindigkeit.

Kennt jemand das Problem und noch besser eine Lösung?
Bitte keine Supportanfragen per PM stellen.

tyco

Hab es mir nochmal genau angesehen und hab festgestellt, daß die Wiedergabe durch überspringen von Bildern (und Ton) so schnell ist.
Bitte keine Supportanfragen per PM stellen.

tyco

27. Juni 2003, 20:13:19 Uhr #2 Letzte Bearbeitung: 27. Juni 2003, 22:20:19 Uhr von tyco
Hab bei den Festplatten DMA deaktiviert (man weiß ja nie).
Die Videos waren auf der Festplatte (also CDRom scheidet aus).

Kein Erfolg.

Dann hab ich Win98SE mit Norton Ghost 2003 gesichert und Win98SE drüber installiert.

Keine Besserung!

Hab jetzt wieder Windows zurück gespielt.

Es ist ein eindeutiges springen von Videosequenzen.
Bitte keine Supportanfragen per PM stellen.

TMK

...scheint ein wirklich komisches Problem zu sein!

Was für Formate sind das denn genau?

tyco

......kannst Du wohl laut sagen.

Avi, Mpg, mpeg sind dabei.

Das komische ist ja das es auch bei Videostreams in Spielen auftaucht.

Oder ich nehm mit der TV-Karte (PCTV Rave von Pinnacle) ein Video vom Fernseher auf (avi) und lass es mit dem Videorecorder der Pinnacle Software abspielen passiert das gleiche.

Aber eindeutig ist es ein überspringen von Bildern (und Ton).
Bitte keine Supportanfragen per PM stellen.

TMK

...also mir fällt da nichts ein.  :-\

Irgendwelche Codecs, Media-Player Updates oder ähnliches installiert?!?

tyco

....hab schon Quick Time und Divx deinstalliert.

Hab auch keinen Plan. Allerdings ist das Problem momentan auch nicht so störend, weil ich keine Vidios am Pc laufen lassen. Und dann hab ich ja noch meinen anderen PC.

Nur wurmt es mich schon. Wenn ich eine Lösung habe, werde ich es natürlich posten.

Bitte keine Supportanfragen per PM stellen.

tyco

Bios, Chipsatztreiber sind erneuert ohne Änderung des Problems.

Nachdem ich im Gerätemanager den Eintrag "NVIDIA nForce Audio Codec Interface" deaktiviert habe, laufen die Videos normal ab, aber ohne Sound.
Bitte keine Supportanfragen per PM stellen.

TMK


tyco

Muss irgendwie mit meinem Board zusammenhängen.

Hab jetzt mal die Norton Ghost Sicherung zurückgespielt, die ich direkt nach der Installation des Boards angelegt habe. Und was soll ich Euch sagen, da ist das gleiche Problem.

Hab es in der Zwischenzeit nur nicht bemerkt.

Es handelt sich um das Abit NF7-S.
Bitte keine Supportanfragen per PM stellen.

tyco

Das Problem besteht weiterhin, obwohl ich es heute nochmal mit dem neuesten Bios für mein Board versucht habe.
Bitte keine Supportanfragen per PM stellen.

tyco

Werde jetzt mal ne Mail an den Support von Abit schicken. Bin gespannt was die dazu sagen.
Bitte keine Supportanfragen per PM stellen.

Linus


tyco

Kaum hatte ich die Mail an Abit geschickt, habe ich selber die Lösung gefunden.

Habe unter Systemsteuerung > Multimedia > Audio > Erweiterte Einstellungen > Leistung die Hardwarebeschleunigung von 100 % um einen Reiter runtergesetzt.

Jetzt läuft alles flüssig.
Bitte keine Supportanfragen per PM stellen.

tyco

Also Abit hat am 16.7. geantwortet. Haben sehr nett geantwortet und sich auch richtig Mühe gegeben. Leider den Fehler nicht gefunden (war allerdings auch recht schwierig). Das Bild unten haben sie auch noch beigefügt.

Dear Customer,

In this case we recommend :
Please download & install the latest bios : http://fae.abit.com.tw/eng/download/bios/nf7-s.htm
Download & install the latest drivers : http://fae.abit.com.tw/eng/download/driver/model/nf7-s.php?key=latest
Make a complete/full reinstallation of your Windows Operating System including the newest service pack.
Install the downloaded drivers. DONE !
In case the soundstorm is still detetected and installed:
Start you windows in Safe mode. Remove/uninstall soundstorm in your device manager.
Start in normal mode and install the newest Realtek ALC 650 drivers :
http://www.realtek.com.tw/downloads/downloads1-3.aspx?software=True&compamodel=ALC650

 
If You don't have any sound either, please check the onboard FPIO2 Header(see Manual page 3-15). Pins 5-6 and 9-10 should be connected by 2 jumpers, if you don't use an ABIT Media XP Front Panel. It should look like this:  ::|.|::

For 5.1 / (=6 channel) surround sound  you will need application software supporting this feature.Like many DVD software appications supplied with hardware(dvd-rom players, graphic cards, etc.) are only the standard version (without 6 channel support). For exmaple : only the PowerDVD XP 4.0 Deluxe version supports 6-channel suround sound. The standard does not.

Dear Customer,

We recommend that to connect all Power connections/plugs of the motherboard.
Please connect the additional ATX 12V connection  and the standard ATX power .

We also recommend a power supply with min. 350 W, the best 400 W and a Combined Power (=3,3 V x ..... A(@ 3.3 V Line) + 5,0 V x ..... A(@ +5.0 V Line)) of min. 220 W.

Please check the specifications of your powersupply (for the combined Power).Please take a look in the bios "PC Health Menu" at the voltage readings . They should not differ more than 0,08 V.

Especially the VCore,DDR VOLTAGE, AGP and I/O Voltage should be stable and not difffer more then 0,02 V. These readings can be also observed in windows through the Hardware Monitor which is often supplied with the motherboard (on CD) or the latest version for your motherboard is available for download(recommended) here : http://fae.abit.com.tw/eng/download/dltools.htm .

Bitte keine Supportanfragen per PM stellen.