Hallo,
das sich in meinem Computer befindliche DVD/CDRW-Laufwerk QSi SBW-161 wird in einer Shell-Sitzung leider nicht von cdrecord erkannt.
Beim Aufrufen des Parameters cdrecord -scanbus erscheint kein CD-Laufwerk.
Das Brennen über K3B geht erstaunlicherweise ...
Ich benutze Suse 9.1 Prof., cdrecord ist Vers. 2.01a31-0, K3B ist Vers. 0.11.17-0
Hat vielleicht jemand eine Idee?
MfG
Stefan
Anbei Auszug aus hwinfo --cdrom
16: IDE 02.0: 10602 CD-ROM (CD-RW)
[Created at block.194]
Unique ID: 90A1._e7V8kYx6eB
Parent ID: 3p2J.rNgK+M0v452
SysFS ID: /block/hdc
SysFS BusID: 1.0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
Hardware Class: cdrom
Model: "QSI CD-RW/DVD-ROM SBW-161"
Vendor: "QSI"
Device: "CD-RW/DVD-ROM SBW-161"
Revision: "SX09"
Serial ID: ""
Driver: "PIIX IDE", "ide-cdrom"
Device File: /dev/hdc
Device Files: /dev/hdc, /dev/by-path/pci-0000:00:1f.1-ide-1:0, /dev/by-id/QSI_CD-RW/DVD-ROM_SBW-16
Device Number: block 22:0
Features: CD-R, CD-RW, DVD
Size: 0 sectors a 512 bytes
Drive status: no medium
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #5 (IDE interface)
Drive Speed: 24
Erscheint das CD-Rom-Laufwerk auch nicht, wenn du cdrecord als root ausführst?
Gruß Moritz
Nein, erscheint auch als Benutzer "root" nicht.
Anbei die Ausgabe von "cdrecord --scanbus"
Cdrecord-Clone 2.01a31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'SPRING ' 'MultiCard Slot A' '0100' Removable Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *